Selection Tools and Contextual Editing with ARES Touch
- 08/06/2015
- Posted by: Graebert
- Category: Tips & TricksVideos
Capturing entities
1
00:00:03,300 –> 00:00:06,589
To select entities, you may simply tap on them.
2
00:00:08,000 –> 00:00:11,820
To unselect all, you can tap on FINISH.
3
00:00:15,100 –> 00:00:17,990
Now let’s see how to use selection windows.
4
00:00:18,300 –> 00:00:20,660
Hold your finger on screen without moving.
5
00:00:20,860 –> 00:00:27,259
If no command is launched, it will start the selection window. Then move your finger to the opposite corner.
6
00:00:27,420 –> 00:00:31,580
If you go from the right to the left, the window is green.
7
00:00:32,540 –> 00:00:37,860
This window will capture the entities inside AND partially inside.
8
00:00:38,900 –> 00:00:42,260
If you go from the left to the right, the window is blue.
9
00:00:42,560 –> 00:00:46,460
And only the entities completely inside will be selected.
10
00:00:46,680 –> 00:00:52,480
By default the selection is in the ADD mode to add entities selection after selection.
11
00:00:52,760 –> 00:00:57,940
If you switch to REMOVE you can subtract entities from your selection.
12
00:00:57,950 –> 00:01:04,710
Finally, when entities are selected, the application toolbar is displaying contextual editing features.
13
00:01:05,260 –> 00:01:08,160
Let’s for example DELETE what was selected.
14
00:01:08,440 –> 00:01:12,560
Of course you can also UNDO the modification.
To learn more about ARES Touch, visit our Youtube Channel: GraebertTV